Materials We Cast & Machine

Aluminium alloys, grey and ductile iron, steel, stainless steel and engineering plastics. Here is what each material is good for, the grades we use most, and how we make sure you get the grade on your drawing.

See Material Grades Ask About a Material
  • 4
    Material families
  • LM4–LM25
    Main aluminium grades
  • COC
    With every order
  • Aluminium LM2, LM4, LM6, LM24, LM25
  • Grey & ductile (SG) iron
  • Steel & stainless steel
  • Spectrometer-checked metal
Aluminium castings made from LM-grade alloy at Audhe Industries, Coimbatore
4
Material
families
Choosing the Right Material

The Right Material for Your Part

The material decides how strong, light, durable and costly your part will be. Whether we are making aluminium gravity die castings, grey iron castings, investment castings or CNC machined components, we start from your drawing and your application, and suggest a better grade if one would save money or last longer.

Metal is checked by spectrometer before it goes into production, and a certificate of conformance comes with every order. Read how we check material and parts on our quality control page.

Spectrometer-Checked Metal

Chemistry confirmed before use

Batch Traceability

Certificates matched to each order

Grade Advice

Help choosing the right grade

Any Standard

IS, BS, EN, ASTM and JIS grades

Material Families

The Materials We Work With

Four material families cover almost every part we make. Each card shows what the material is good at and the grades we use most often.

Aluminium Alloys

Light, corrosion resistant and easy to cast. Our main material for gravity die, sand and pressure die castings in automotive, hydraulic, textile and general engineering parts.

  • Light weight and good machinability
  • Thin walls and complex shapes
  • Heat-treatable grades for extra strength
Common grades
LM2 (ADC12)LM4LM6LM9LM24 (A380)LM25 (A356)

Grey & Ductile Iron

Strong, wear resistant and good at damping vibration. The most economical choice for heavy, robust castings such as pump bodies, motor housings and machine parts.

  • Low cost per kilogram
  • Good wear resistance and machinability
  • Ductile (SG) iron for higher strength and toughness
Common grades
IS 210 FG 200FG 260FG 300IS 1865 SG 400/15SG 500/7

Steel & Stainless Steel

Carbon and alloy steels for strong machined parts, and stainless steel where corrosion resistance or hygiene matters. Stainless parts are made by investment casting or machined from bar.

  • High strength and toughness
  • Stainless grades resist rust and chemicals
  • Investment cast or CNC machined
Common grades
Mild steelEN8EN19EN24SS 304 (CF8)SS 316 (CF8M)

Engineering Plastics

Light, self-lubricating and chemical resistant. A cost-effective replacement for metal in bushes, gears, wear pads and insulating parts where loads are moderate.

  • Low friction and quiet running
  • No corrosion
  • Electrically insulating
Common grades
PA66 (Nylon)POM (Acetal)HDPEPTFEPolycarbonate
Aluminium Alloy Reference

Aluminium Casting Grades at a Glance

The six aluminium casting alloys we are asked for most, with their equivalents, main alloying elements and typical uses.

Main alloying elements in weight %, per BS 1490
GradeUSA / JapanMain elements (%)Heat treatableTypical usesCasting method
LM2384 / ADC12Si 9.0–11.5, Cu 0.7–2.5NoHousings, covers, electrical partsPressure die
LM4319 / AC2ASi 4–6, Cu 2–4YesPump bodies, valve housings, general partsSand, gravity die
LM6A413 / AC3ASi 10–13NoThin-walled, marine and food equipment castingsSand, gravity die
LM9A360 / AC4ASi 10–13, Mg 0.2–0.6YesStronger alternative to LM6Gravity die, low-pressure
LM24A380 / ADC10Si 7.5–9.5, Cu 3–4NoAutomotive brackets, gearbox coversPressure die
LM25A356 / AC4CSi 6.5–7.5, Mg 0.2–0.6Yes (T6)Structural, hydraulic and pressure-tight partsGravity die, sand

Mechanical properties depend on casting method, heat treatment and section thickness. Test reports are available on request.

See the Full LM Alloy Chart
Selection Guide

How to Choose the Right Material

Start with what matters most for your part. If you are unsure, tell us the load, environment and quantity, and our engineers will suggest a grade.

Light Weight With Good Strength?

Choose aluminium. LM6 for thin, intricate or corrosion-exposed castings, LM4 for general parts, and LM25 heat treated to T6 when strength matters most. See the full LM alloy chart.

  • Weight-critical parts
  • Gravity die, sand or pressure die casting
  • Machines quickly and cleanly

Strength and Low Cost?

Choose grey or ductile iron. FG 260 suits most machine and pump castings; SG 500/7 when the part needs higher strength and some toughness.

  • Heavy-duty, robust parts
  • Good vibration damping
  • Economical in medium and large sizes

Corrosion Resistance or Hygiene?

Choose stainless steel. 304 covers general corrosion resistance; 316 adds molybdenum for chlorides and many chemicals. Investment casting makes detailed stainless parts with little machining.

  • 304 (CF8): general use
  • 316 (CF8M): chloride and acid environments
  • Polished or passivated finishes on request

Low Friction, No Rust, Low Cost?

Choose an engineering plastic when metal is more than the job needs.

  • PA66: wear parts, gears, bushes
  • POM: precise sliding and snap-fit parts
  • PTFE: seals, liners and low-friction pads
Material Certification

The Right Grade, With the Paperwork to Prove It

How we make sure your parts are made from the material on your drawing.

Chemistry Check

Incoming metal is checked by spectrometer against the grade on your drawing before it is used.

Mill Test Certificates

Supplier certificates for bar, plate and ingot are reviewed and kept on file, and copies are supplied on request.

Certificate of Conformance

A COC confirming grade and drawing compliance comes with every order.

Batch Traceability

Castings are traced to their melt or batch, which supports PPAP and customer audits.

Material FAQ

Questions About Casting and Machining Materials

What engineers and buyers usually ask us about grades, certificates and heat treatment.

LM4 and LM25 are the usual choices. LM4 casts well and gives good pressure tightness for valve bodies and manifolds. LM25, heat treated to the TF (T6) condition, is preferred where the part needs more strength, such as pump housings and cylinder bodies that see higher pressures.

LM2 is a high-silicon alloy with copper, made for pressure die casting. It fills thin walls well but has lower ductility and is not heat treated. LM25 has about 7% silicon plus magnesium and is used for gravity and sand casting. It can be heat treated for much higher strength and has better corrosion resistance and elongation, so it suits structural and pressure-tight parts. Our aluminium alloy chart compares all the LM grades.

Yes. Every order comes with a certificate of conformance. Chemical analysis reports, supplier mill test certificates and heat treatment records are supplied when your order asks for them. Please mention the documents you need when you send your enquiry.

Yes. We make stainless steel parts by investment casting, mainly in 304 and 316 grades (cast equivalents CF8 and CF8M), and we CNC machine stainless steel bar and plate to drawing.

Often, yes. Send us the specification and we will check whether we can source and process it, and confirm before quoting. Grades to Indian, British, European, American and Japanese standards are all common on the drawings we receive.

Yes. T6 (solution treatment and ageing) is common for LM25 aluminium castings, and iron and steel parts can be annealed or hardened where the drawing requires it. Heat treatment is done in-house or by trusted partners, and the records are included in our quality documents.

Need Material Advice?

Tell us the operating temperature, load, environment, weight target and quantity. Our engineers will suggest a suitable grade and manufacturing method.

Get Material Advice
SIDCO Industrial Estate, Malumichampatti, Coimbatore – 641050, India

Made in the Right Material, Certified to Prove It

Send us your drawing with the material grade, or tell us what the part has to do. We will reply with a material recommendation and a quote, usually within 24 to 48 hours.