Aluminium Castings Manufacturer in India
Audhe Industries is an ISO 9001:2015 certified aluminium casting manufacturer, supplier and exporter in Coimbatore, India. We produce gravity die castings, sand castings and pressure die cast components in LM2, LM4, LM6, LM24 and LM25 alloys, as-cast or CNC machined, with every casting OES spectrometer verified and inspected before dispatch.
Gravity Die, Sand & Pressure Die Aluminium Castings from Coimbatore
Audhe Industries manufactures aluminium castings at its foundry in Coimbatore, Tamil Nadu, from simple brackets and housings to complex multi-core components for automotive, hydraulic, general engineering and export customers.
Most of our production is gravity die castings (GDC parts), made by pouring OES-verified aluminium alloy into permanent steel dies. Gravity die casting gives better mechanical properties and a cleaner surface than sand casting, without the high tooling cost of pressure die casting. We also produce aluminium sand castings and pressure die castings, depending on the design, volume and alloy.
As well as our standard range, we make custom and OEM aluminium castings to customer drawings, supplied as-cast or with in-house CNC machining. Overseas buyers sourcing aluminum castings from India receive a Certificate of Conformance (COC) with every shipment, with PPAP and material test certificates on request.
GDC — Gravity Die Casting
Permanent steel die, gravity pour — best for LM4, LM6, LM25 medium-high volume
Sand Casting
Lowest tooling cost, highest design flexibility — all LM grades
OES Verified Alloy
Every incoming batch spectrometer-checked before entering production
COC with Every Shipment
Certificate of Conformance, PPAP, MTC on request
Aluminium Casting Products
A selection of aluminium castings we manufacture: GDC parts, gravity die castings, sand cast components and machined castings in LM2, LM4, LM6, LM24 and LM25 alloys, for automotive, hydraulic, engineering and export customers. Click any photo to view full size.
1 / 13
2 / 13
3 / 13
4 / 13
5 / 13
6 / 13
7 / 13
8 / 13
9 / 13
10 / 13
11 / 13
12 / 13
13 / 13
Alloy Grades We Cast — LM2 to LM25
Each grade is chosen for its castability, strength, corrosion resistance and application. If your drawing specifies an ASTM or JIS grade such as A356, A380, A413 or ADC12, the matching LM equivalent is shown below. Our engineers advise on the best grade for your component at no charge.
High-Silicon Pressure Die
General automotive parts, motor housings, brackets. Excellent fluidity for thin-wall pressure die casting.
Hydraulic & Pump Bodies
Good castability with better strength than LM2. Valve bodies, pump housings, manifolds by gravity die or sand casting.
Marine & Corrosion Grade
High silicon, excellent corrosion resistance. Marine, general engineering and food equipment castings.
High-Volume Automotive
Best choice for high-volume pressure die casting. Automotive, electrical and consumer products.
Structural & Defence Grade
T6 heat treatment gives UTS of 280 MPa+. Aerospace, defence, structural and hydraulic applications.
Textile & General Eng.
Good combination of castability and mechanical properties for general engineering applications.
Three Aluminium Casting Methods — Which Is Right for You?
We offer three aluminium casting methods and choose between them based on your component design, production volume and alloy grade. We recommend the best method during our DFM review.
Gravity Die Casting (GDC)
Also called permanent mould casting. Molten aluminium is poured by gravity into a reusable steel die, giving better mechanical properties and surface finish than sand casting. Most of our aluminium castings are GDC parts. Ideal for LM4, LM6 and LM25 in medium-to-high volume.
Sand Casting
Aluminium poured into sand moulds, with the lowest tooling cost and the most design flexibility. Best for prototypes, complex shapes, large components and low-volume aluminium casting. All LM grades suitable. Pattern lead time 3–6 weeks, with no die tooling investment.
High Pressure Die Casting (HPDC)
Molten aluminium injected at high pressure into a steel die, giving the fastest cycle times, thinnest walls and best dimensional accuracy. Used for LM2 and LM24 (ADC12 / A380) in automotive, electrical and consumer products at high volumes.
Where Our Aluminium Castings Are Used
From automotive aluminium castings to pump and valve bodies, these are the components we most often cast and machine for OEMs in India and abroad.
Automotive Castings
Housings, brackets and structural parts in LM25 and LM24 for automotive OEMs.
Pump & Valve Bodies
Aluminium pump housings, valve bodies and manifolds, typically in LM4 or LM25.
Motor & Electrical Housings
Aluminium motor housings and electrical enclosures by pressure die or gravity die casting.
Hydraulics & General Engineering
Machined aluminium castings for hydraulic systems, textile machinery and industrial equipment.
Marine & Food Equipment
Corrosion-resistant LM6 (A413) sand and gravity die castings.
Defence & Structural
T6 heat treated LM25 (A356) castings where strength and consistency are critical.
Aluminium Casting Manufacturer in Coimbatore, Tamil Nadu
Our foundry in SIDCO Industrial Estate, Coimbatore, supplies OEMs across Tamil Nadu and the rest of India. Its location in the heart of South India's engineering belt keeps lead times short for manufacturers in Chennai, Hosur, Trichy and Bengaluru.
For overseas buyers looking to source aluminium castings from India, we handle export packing and documentation, and ship to more than 30 markets. You get one supplier for casting, machining and inspection, at cost-effective Indian manufacturing rates.
Send Your DrawingCustomers we serve
Aluminium Casting — Frequently Asked Questions
Other Products & Capabilities
Looking for an Aluminium Casting Manufacturer in India?
Send us your drawing, sample or requirement. Our foundry team will advise on the best alloy and casting method and send a competitive quote within 24 hours, from prototype to high volume and from gravity die to pressure die casting.