Metal Fabrication & Laser Cutting in Coimbatore
Custom parts and assemblies in mild steel, stainless steel and aluminium: laser cut, bent, welded and powder coated to your drawing.
From Flat Sheet to a Finished, Ready-to-Fit Part
Brackets, machine guards, panels, enclosures, frames and stands: most machines and plants depend on fabricated metal parts. Getting them right means accurate cutting, clean bends, sound welds and a finish that lasts.
Our metal fabrication shop in the SIDCO Industrial Estate, Coimbatore, handles mild steel, stainless steel (SS 304 and 316) and aluminium from 0.5 mm to 12 mm thick, on sheets up to 2500 × 1250 mm. CNC laser cutting gives clean, accurate profiles with no tooling cost. Bending, welding, drilling and powder coating are then done by the same team.
One supplier takes your part from raw sheet to a coated, inspected component. That means fewer handovers, shorter lead times and one point of contact, whether you need a single prototype or a regular production batch.
CNC Laser Cutting
Clean, accurate profiles in MS, SS and Al, no tooling cost
MIG / TIG / Arc Welding
The right process for each material and job
Bending & Rolling
Press brake bending and plate rolling to your profile
Surface Finishing
Powder coating, painting and galvanising
Fabrication Experience
Sheet Metal Fabrication Services Under One Roof
Every stage your part needs, from cutting raw sheet to a coated, inspected part ready for your line.
CNC Laser Cutting
Laser cutting of mild steel, stainless steel and aluminium sheet. Holes, slots, cut-outs and complex profiles are cut in one pass straight from your DXF file, with clean edges and no tooling cost.
Welding
Our welders match the process to the job: MIG for fast, strong welds on mild steel and aluminium, TIG for clean, precise welds on stainless and thin sheet, and arc welding for heavy structural work.
Bending & Rolling
Press brake bending for angles, channels, Z-profiles and boxes, with consistent results batch after batch. Plate rolling for cylinders, cones and curved sections.
Drilling, Tapping & Grinding
Holes drilled, threads tapped (metric and BSP), countersinks and counterbores added, and weld seams ground flush or blended, all in-house.
Surface Finishing
Powder coating, liquid painting and galvanising, each applied after proper surface preparation so the finish bonds and lasts indoors or outside.
Assembly & Sub-Assembly
Fasteners, inserts, brackets and hardware fitted, so you receive complete sub-assemblies, inspected and ready to install.
Mild Steel, Stainless Steel & Aluminium
Each metal cuts, bends, welds and finishes differently. We set up every job to suit the material.
Mild Steel
Economical, strong and easy to weld and form. The usual choice for frames, guards, brackets, panels and enclosures, finished with paint, powder coat or galvanising to stop rust.
Stainless Steel
Corrosion-resistant, hygienic and smart in appearance. SS 304 suits most industrial and food-contact uses, and SS 316 suits wet, coastal or chemical environments. Welded by TIG to keep its corrosion resistance.
Aluminium
About a third of the weight of steel, with good corrosion resistance and formability. Used for enclosures, covers, panels and lightweight frames.
Our Fabrication Process
Every job follows the same steps, so your parts are right first time and arrive when promised.
Drawing Review & Quote
Send your DXF, DWG, PDF or 3D file. We check material, thickness and quantity, and reply with a price and lead time within 24 hours.
Material
Sheet, plate, tube or sections are bought with mill certificates, and checked for grade and thickness on arrival.
Laser Cutting & Shearing
Parts are nested on each sheet to save material, laser cut or sheared, deburred and labelled.
Bending & Rolling
Blanks are bent and rolled to shape. The first part is measured before the batch runs.
Welding & Fitting
Parts are set in jigs, tacked and welded in a planned sequence to limit distortion, then checked again.
Drilling & Finishing
Holes and threads are added and weld seams are ground or blended to the finish you need.
Surface Treatment
Parts are cleaned or blasted, then powder coated, painted or galvanised. Coating thickness is checked.
Inspection & Dispatch
Parts are checked against your drawing, then wrapped, packed and dispatched with an inspection report if required.
Laser Cutting, Welding & Finishing, Explained
What each of our core processes does, and why it matters for your parts.
Laser Cutting: Accurate Parts With No Tooling Cost
A focused laser beam melts through the sheet along a path programmed straight from your drawing. The cut edge is clean and accurate, and the heat-affected area is small.
- Complex profiles, slots, holes and cut-outs in a single pass
- No dedicated tooling, so prototypes and small batches stay affordable
- DXF and DWG files programmed directly, with no redrawing
- Nesting places many parts on each sheet to reduce scrap
- Clean stainless edges that often need no further finishing
Welding: The Right Process for Each Material
A weld decides the strength, look and life of an assembly, so we match the process to the job:
- MIG welding: quick and strong, ideal for mild steel and aluminium frames and production work
- TIG welding: clean and precise, used for stainless steel, thin sheet and visible welds
- Arc welding: for thick mild steel sections and heavy structural work
- Weld jigs that hold parts in exact alignment for square frames and boxes
- Distortion corrected after welding, and every weld visually inspected
- Dye penetrant testing available on request for critical welds
Surface Finishing: Protection That Lasts
The right finish greatly extends the life of a fabricated part, especially mild steel used outdoors or in humid conditions. We offer:
- Powder coating: tough, even, chip-resistant finish in RAL colours
- Liquid painting: epoxy, PU or enamel for large or awkward parts
- Galvanising: zinc protection for outdoor steel, hot-dip or electro, through partners
- Shot blasting, phosphating or chemical cleaning before coating for good adhesion
- Coating thickness measured and recorded before dispatch
Fabrication Capabilities at a Glance
Check whether your part fits our standard range. If it is outside these figures, ask us anyway.
| Process | Materials | Thickness / Size | Notes |
|---|---|---|---|
| CNC Laser Cutting | MS, SS 304/316, Al | 0.5–12 mm; sheets up to 2500 × 1250 mm | Complex profiles from DXF, no tooling cost |
| Shearing | MS, SS, Al | Up to 2500 mm length | Fast, economical straight cuts |
| Press Brake Bending | MS, SS, Al | Up to 2500 mm bend length | Channels, boxes, brackets and multi-bend profiles |
| Plate Rolling | MS, SS | Thickness and width on request | Cylinders, cones and curved sections |
| MIG Welding | MS, Al | 0.8 mm and above | Fast, strong welds for frames and production work |
| TIG Welding | SS, Al, MS | 0.5 mm and above | Clean, precise welds for stainless and thin sheet |
| Arc Welding | MS | Heavier sections | Structural and heavy-duty fabrication |
| Drilling & Tapping | MS, SS, Al | Metric and BSP threads | Countersinking and counterboring |
| Powder Coating | MS, Al | Size on request | RAL colours; coating thickness checked |
| Galvanising | MS | Through partners | Hot-dip or electro-galvanised for corrosion protection |
Capabilities are typical and depend on part shape, grade and finish. Send your drawing for an exact assessment.
Where Our Fabricated Parts Are Used
We make fabricated parts for Coimbatore's machinery, pump and textile makers, and for buyers across India.
Industrial Machinery
Machine guards, covers, stands, bases, conveyor frames and panels
Pumps & Motors
Base frames, guards, brackets, covers and terminal boxes
Electrical Enclosures
Control panels, switchgear cabinets, junction boxes and cable trays
Textile Machinery
Machine frames, guards, covers and brackets
Automotive
Brackets, mounting plates, heat shields and small frames
Agriculture
Implement frames, brackets, hoppers and covers
Food Processing
SS 304/316 hoppers, chutes, frames and work surfaces
Buildings & Plants
Platforms, staircases, handrails, gates and structural frames
Checked at Every Cut, Bend and Weld
Fabrication quality is decided along the way, not just at the end. We check the material when it arrives, the first part of every setup, every weld and every coating.
Material Checked on Arrival
Mill certificates are matched to the order, and sheet thickness is gauged before cutting.
First-Off Inspection
The first part of every new setup is measured against your drawing before the batch runs.
Weld Inspection
Every weld is visually inspected for porosity, undercut and cracks. Dye penetrant testing is available on request.
Coating Checks
Coating thickness is measured after powder coating or painting, and only parts within specification are released.
Why Buyers Choose Us
- Cutting to coating with one supplier
- Made to your drawing, sample or sketch
- Prototypes and production runs
- No tooling cost on laser-cut parts
- Delivery across South India and beyond
Why Choose Our Fabrication Shop
Coimbatore has plenty of fabricators. Here is what makes working with us different.
One Supplier, Start to Finish
Laser cutting, bending, welding, drilling and coating are coordinated by one team, so there are no handoffs between vendors and only one person to call.
Laser Cutting for Any Shape
Intricate cut-outs, slots and curves are cut in one pass. With no tooling cost, prototypes and small batches stay economical.
Skilled Welders
Our welders work in MIG, TIG and arc on steel, stainless and aluminium, with back-purging for clean stainless joints.
Machining & Castings Too
Need machined faces or cast parts on your fabrication? Our CNC shop and foundry are on the same site.
Prototype to Production
We give a single prototype the same care as a large batch, and fit urgent prototypes around production work.
Based in Coimbatore
Our SIDCO location means good material prices, skilled people and quick delivery across Tamil Nadu and South India.
Metal Fabrication: Your Questions Answered
Have a question that is not covered here? Call +91 422 417 2126 or email enquiry@audhe.com. We reply within 24 hours.
Have a Fabrication Job for Us?
Send your drawing, DXF file or a sample. Within 24 hours you will get a material recommendation, process plan and clear quote.