Aluminium Casting

Aluminium Casting HSN Code
and GST Rate Guide

A complete guide to HSN codes and GST rates for aluminium castings in India — understanding HS Chapter 76, sub-classifications, applicable tax rates, compliance best practices and frequently asked questions for manufacturers, traders and exporters.

Audhe Industries 8 Sections · 10 min read
7616

Primary HSN Code

Other articles of aluminium

18%

Standard GST Rate

Most aluminium articles

Ch. 76

HS Chapter

Aluminium & articles thereof

8-digit

India HSN Digits

Required for GST filing

Aluminium castings — precision-cast aluminium components classified under HSN code 7616 for GST and customs purposes in India

What is an HSN Code?

The Harmonised System of Nomenclature (HSN) is a globally standardised system for classifying goods, developed by the World Customs Organisation (WCO). It assigns a unique numeric code to every product traded internationally — allowing consistent identification, customs valuation and tax application across different countries.

In India, HSN codes are used in the Goods and Services Tax (GST) framework to determine the applicable tax rate for each product. As of 2021, India mandates 8-digit HSN codes for all GST invoices above specified turnover thresholds, and 6-digit codes for customs and export documentation. For importers and exporters, the HSN code also determines Basic Customs Duty (BCD), IGST and applicable exemptions.

How HSN Codes are Structured

  • First 2 digits: HS Chapter number — broad category (e.g., Chapter 76 = Aluminium and articles thereof)
  • First 4 digits: HS Heading — specific product category within the chapter (e.g., 7616 = Other articles of aluminium)
  • 6 digits: HS Sub-heading — more specific product classification (international standard)
  • 8 digits: Tariff Item — country-specific classification used in India for GST and customs purposes
Important: HSN codes and GST rates are subject to revision by the GST Council and CBIC (Central Board of Indirect Taxes and Customs). Always verify the current applicable code and rate with the official GST portal (gst.gov.in) or a qualified tax professional before filing returns or raising invoices.

1HS Chapter 76 — Aluminium and Articles Thereof

Aluminium castings fall within HS Chapter 76 of the Harmonised System — the chapter covering aluminium and articles made from aluminium. Chapter 76 encompasses unwrought aluminium, aluminium powder and flakes, bars, rods, profiles, wire, plates, sheets, foil, tubes, pipes, fittings and — most relevant for cast components — other articles of aluminium.

7601

Unwrought Aluminium

Aluminium in primary forms — ingots, billets, T-bars and similar forms used as raw material input for casting and rolling operations. Not finished aluminium cast articles.

7602

Aluminium Waste and Scrap

Covers all aluminium waste and scrap — including gates, runners and rejected castings that are collected and returned to the furnace. Subject to specific GST treatment as scrap material.

7604

Aluminium Bars, Rods and Profiles

Extruded or drawn aluminium profiles, structural sections, bars and rods — not cast articles but often used alongside castings in assemblies.

7606

Aluminium Plates, Sheets and Strip

Rolled aluminium flat products — sheet metal that may be fabricated into components but is not cast. Relevant for comparison when classifying formed sheet metal parts versus cast components.

7609

Aluminium Tube or Pipe Fittings

Fittings such as couplings, elbows and sleeves — some of which may be produced by casting processes. Classification depends on whether the fitting is an article of aluminium within this heading or within 7616.

7616

Other Articles of Aluminium ★

The principal heading for aluminium castings — covers all aluminium articles not classified more specifically elsewhere in Chapter 76. This is the most important heading for precision aluminium die castings, gravity castings, sand castings and permanent mould castings.

Key principle: Aluminium cast articles that are not more specifically covered by another heading in Chapter 76 (such as tube fittings under 7609, or containers under 7612) are classified under 7616 — Other articles of aluminium.

2Key HSN Codes for Aluminium Castings

Most aluminium cast components are classified under HSN 7616. The appropriate 8-digit sub-heading depends on the nature of the casting and its intended use.

Primary Code
7616

Other Articles of Aluminium

The umbrella heading for aluminium cast articles not classified more specifically elsewhere in Chapter 76. Covers die castings, gravity castings, sand castings and permanent mould castings across all industries — automotive components, electronics housings, aerospace brackets, industrial machinery parts.

Sub-heading
761610

Nails, Tacks, Staples, Screws, etc.

Covers small aluminium fastener-type items — nails, tacks, staples, bolts, nuts, screws and similar articles. Some small cast hardware items may fall here rather than under 761699 depending on their specific form and function.

Most Common
761699

Other — Aluminium Articles NES

The most widely used 6-digit code for general aluminium castings — covers all aluminium articles of Chapter 76 not elsewhere specified. Precision die castings, gravity die castings, investment castings and sand castings for automotive, aerospace, electronics and industrial applications are classified here.

Note
7609

Aluminium Tube or Pipe Fittings

If the aluminium casting is specifically a tube or pipe fitting (coupling, elbow, union, flange for piping systems), it may be classified under 7609 rather than 7616. The intended use and form of the casting determines the correct classification.

Scrap
7602

Aluminium Waste and Scrap

Rejected castings, flash, gates and runners returned to the furnace are classified as aluminium scrap under 7602. Scrap sold to third parties requires a tax invoice with the correct HSN code for the scrap material — not the finished casting code.

Raw Material
7601

Unwrought Aluminium (Ingots)

Aluminium ingots, billets and alloy ingots purchased as raw material for casting are classified under 7601. Input tax credit (ITC) on GST paid on 7601 purchases is available against output tax on 7616 finished castings.

3GST Rates for Aluminium Articles

GST rates for aluminium articles in India are determined by the GST Council notification applicable to the HSN code. The following rates apply generally — always verify current rates on the official GST portal or with a tax professional, as rates are subject to revision.

18%

Standard Rate — HSN 7616

Most aluminium cast articles under HSN 7616 (including die castings, gravity castings and sand castings for general industrial, automotive and electronics applications) attract 18% GST.

12%

Reduced Rate — Specific Items

Some specific categories within aluminium articles may attract 12% GST depending on the product's nature and end-use. Confirm the applicable rate for your specific product description with a tax professional or the GST portal.

5%

Concessional Rate — Special Cases

A 5% GST rate may apply to certain aluminium articles supplied to specific end-use sectors or under particular conditions — for example, some agricultural or medical applications. Confirm eligibility before applying this rate.

Disclaimer: GST rates are subject to change by the GST Council. The rates shown above are for general guidance only. Audhe Industries recommends verifying the current applicable GST rate for your specific product with a qualified CA or tax consultant, or through the official GST portal at gst.gov.in, before raising invoices or filing returns.

4Aluminium Casting HSN Code Reference Table

HSN CodeProduct DescriptionGST RateNotes
7601Unwrought aluminium — ingots, billets, T-bars (raw material)18%Input raw material for casting. ITC claimable against output
7602Aluminium waste and scrap18%Rejected castings, gates, runners sold as scrap
7609Aluminium tube or pipe fittings (couplings, elbows, flanges)18%Cast fittings specifically for piping systems
7616Other articles of aluminium (general heading)18%Primary heading for most aluminium cast components
761610Aluminium nails, tacks, staples, screws, nuts, bolts, similar18%Small hardware and fastener-type cast articles
761691Aluminium cloth, grill, netting, fencing18%Not applicable for cast components
761699Other articles of aluminium NES — general cast parts18%Most common code for precision die castings and gravity castings
76169990Other articles of aluminium (8-digit India tariff)18%Full 8-digit code required for GST invoices in India
7615Table, kitchen or household articles; pot scourers; sanitary ware18%Consumer cookware and sanitary fittings — not industrial castings
8708Parts and accessories for motor vehicles18%Some automotive aluminium castings may be classified here if they are clearly identified as vehicle parts — takes precedence over 7616 for specific automotive components
Classification rule: When a casting could fall under multiple headings, Chapter Notes and Section Notes of the Customs Tariff determine the correct classification. When in doubt — for example, an aluminium automotive bracket that could be 7616 or 8708 — consult the tariff schedule chapter notes, applicable advance rulings, or a licensed customs broker.

5How to Find the Right HSN Code for Your Aluminium Casting

1

Identify the Material

Confirm the product is made of aluminium (not zinc, magnesium or other metals). Chapter 76 covers aluminium specifically — zinc die castings fall under Chapter 79, magnesium under Chapter 81. Mixed-material products follow specific classification rules.

2

Determine if a More Specific Heading Applies

Before defaulting to 7616, check whether the casting is: a tube or pipe fitting (7609), a container or receptacle (7612/7613), a table or kitchen article (7615), or a part for a specific machine or vehicle (relevant chapter for that machine). More specific headings take precedence over the general "other articles" heading.

3

Search the GST HSN Portal

Visit gst.gov.in → GST Rates → Search HSN Code. Enter descriptive keywords for your product — "aluminium casting", "aluminium die cast component" etc. Review the search results and the full description of candidate headings to confirm the best match.

4

Check Advance Rulings and Tariff Orders

The Authority for Advance Rulings (AAR) and the Customs Tariff Advisory Committee issue binding rulings on classification disputes. Search for advance rulings related to your specific aluminium product — these provide authoritative guidance on how similar products have been classified.

5

Consult a Tax Professional

For high-value or high-volume transactions, invest in a classification opinion from a qualified CA, CMA or licensed customs broker. Incorrect HSN classification can result in penalties, demand notices for differential GST, and complications in GST return reconciliation. Professional advice is significantly cheaper than retrospective correction.

6

Document Your Classification Rationale

Maintain a written record of how you determined the HSN code for each product — the relevant tariff headings considered, why the chosen heading applies, and any advance rulings or professional opinions relied upon. This documentation supports your position if your classification is questioned during a GST audit.

6GST Compliance Best Practices for Aluminium Casting Businesses

📋 Use Correct Digit Levels

India requires 4-digit HSN codes for businesses with annual turnover of ₹1.5–5 crore, 6-digit for ₹5 crore and above. For export documentation and customs clearance, 8-digit codes are mandatory. Always use the correct number of digits for the applicable transaction type and turnover slab.

🧾 Mention HSN on All Tax Invoices

The HSN code must appear on every GST tax invoice for the supply of goods. Incorrect or missing HSN codes on invoices can lead to invoice rejection by the buyer's GST system and complications in ITC (Input Tax Credit) matching for both parties.

🔄 Claim ITC on Inputs

GST paid on aluminium ingots (7601), alloys, energy and manufacturing services is eligible for Input Tax Credit against your output GST liability on finished castings (7616). Maintain proper purchase records and ensure supplier invoices carry correct HSN codes to avoid ITC reversals.

📦 Export Benefits — LUT or Refund

Aluminium castings exported from India are zero-rated under GST. Exporters can either supply under LUT (Letter of Undertaking) without paying GST and claim refund of ITC accumulated, or pay IGST on export and claim a refund. Both routes require correct HSN codes on the shipping bill and GST export invoice.

📊 File GSTR-1 and GSTR-3B Accurately

HSN summary is required in GSTR-1 — report all outward supplies by HSN code with quantity, value and tax amount. Discrepancies between GSTR-1 (outward supplies) and GSTR-3B (tax payment) at the HSN level trigger scrutiny notices from the GST department.

🔍 Review Classifications Periodically

GST Council notifications periodically revise rates and reclassify products. Subscribe to CBIC circulars and notifications, or maintain a relationship with a tax professional who monitors GST updates. A rate change you are unaware of can lead to underpayment or overpayment of GST — both creating compliance risk.

7HSN Codes for Export of Aluminium Castings

When exporting aluminium castings from India, the HS code used on the shipping bill must match the product's international classification under the Harmonised System — typically the same 6-digit code structure used for GST purposes (761699 for general aluminium cast articles), with 8-digit Indian tariff codes used for domestic GST documentation.

Export Documentation Requirements

  • Shipping Bill (SB): Must include the correct 8-digit ITC-HS code (India's export tariff code aligned with HSN) — 76169990 for most general aluminium castings. The shipping bill HS code is verified by Customs at the port of export
  • Commercial Invoice: Must match the HSN code on the tax invoice and shipping bill. Country-specific invoicing requirements (EU, US, UAE) may add additional documentation — FORM A for GSP preferences, Certificate of Origin from EPC/chambers
  • GST Export Invoice: Must state "Supply meant for export under LUT" or carry IGST amount if opting for the IGST refund route. The HSN code on this invoice feeds into the GSTR-1 export data that is later reconciled with shipping bill data
  • Country-Specific HS Codes: While the first 6 digits of HS codes are internationally standardised, importing countries add their own national sub-headings at the 7th and 8th digit level. Your foreign buyer may need to provide their local tariff code to determine the import duty rate applicable in their country

Export Incentives

  • RoDTEP (Remission of Duties and Taxes on Exported Products): A scheme that refunds embedded taxes and duties in export products. The RoDTEP rates are specified at the HS code level — verify the applicable rate for your specific HS code of aluminium casting through the DGFT (Directorate General of Foreign Trade) schedule
  • RODTEP and MEIS: Various export incentive schemes applicable at the HSN code level — eligibility depends on correct classification and compliance with applicable scheme conditions
  • EPCG Scheme: Capital goods imported under EPCG (Export Promotion Capital Goods) at concessional duty must be used to produce goods exported — HSN codes help establish the link between the capital goods and the exported products
At Audhe Industries, we export aluminium castings to customers across the globe. Our documentation team ensures all shipping bills, commercial invoices and certificates of origin carry the correct HS codes for seamless customs clearance at destinations in Europe, the Middle East, North America and Southeast Asia.

Conclusion

Understanding HSN codes and GST rates is an essential part of operating an aluminium casting business in India — whether you are a manufacturer, trader or exporter. HSN 7616 (specifically 76169990 at the 8-digit level) is the most commonly applicable code for precision aluminium castings produced by die casting, gravity casting, sand casting and investment casting processes.

Using the correct HSN code on invoices, GSTR filings and export documentation ensures GST compliance, enables smooth Input Tax Credit claims, and supports accurate customs clearance for exports. When in doubt, always consult the official GST portal or a qualified tax professional — the cost of professional guidance is far less than the cost of incorrect classification discovered during an audit.

For high-quality aluminium castings with full documentation support, contact Audhe Industries — we provide accurate HSN classification on all our invoices as part of our commitment to transparency and compliance.

?Frequently Asked Questions

Most aluminium castings are classified under HSN 7616 — "Other articles of aluminium." The most commonly used 6-digit sub-heading is 761699 (Other articles of aluminium NES), and the full 8-digit India tariff code is 76169990. Some specific aluminium cast products may be classified differently — for example, pipe fittings under 7609 or automotive parts under Chapter 87. Always verify the applicable code for your specific product.
Aluminium castings classified under HSN 7616 generally attract 18% GST in India. The applicable rate depends on the specific product and its classification — verify the current rate on the official GST portal (gst.gov.in) or with a qualified tax professional, as GST Council notifications may have revised rates. For exports, aluminium castings are zero-rated under GST.
HSN (Harmonised System of Nomenclature) codes classify goods — physical products like aluminium castings. SAC (Services Accounting Code) codes classify services. When selling aluminium cast products, use the HSN code (7616). When providing machining, fabrication or job-work services on customer-supplied material, use the appropriate SAC code for the service. A business that both manufactures and provides services will use both HSN and SAC codes on different invoices.
Yes — GST paid on aluminium ingots (HSN 7601), alloys and other inputs used in manufacturing aluminium castings (HSN 7616) is eligible for Input Tax Credit (ITC). The ITC is claimed against the output GST liability on your finished castings. To claim ITC, ensure your supplier's invoice carries the correct HSN code and GSTIN, and that the invoice appears in GSTR-2B. ITC on capital goods (machines) is also available and must be spread across five years (20% per year).
For exports from India, use the 8-digit ITC-HS export tariff code — 76169990 for most general aluminium cast articles. This code appears on the shipping bill, commercial invoice and packing list. For the buyer's import documentation in their country, the HS code will use the same first 6 digits (761699) but their national tariff adds the final 2 digits according to their country-specific classification. Your freight forwarder or customs broker will help confirm the correct import HS code for the destination country.
Using an incorrect HSN code can result in: GST audit queries and demand notices for differential tax (if the correct rate is higher than what you charged); ITC denial for your customer if the code mismatch causes their GSTR-2B reconciliation to fail; penalties for incorrect return filing; and complications in export refund processing if the export invoice code doesn't match the shipping bill. Corrective credit/debit notes can be issued to rectify incorrect HSN codes, but prevention is far better than correction.
No — the HSN classification is based on the composition of the product (aluminium) and its nature as an article, not on the specific manufacturing process used to produce it. Both die castings (HPDC, gravity) and sand castings are classified under HSN 7616 if they are aluminium articles not more specifically classified elsewhere. The casting process (sand, die, investment) does not determine the HSN code — the finished product's form, function and material do.

Need Precision Aluminium Castings for Export?

Audhe Industries delivers high-quality aluminium castings with complete documentation — correct HSN codes, certificates of origin and export invoices for seamless customs clearance worldwide.