Table of Contents

Expert Fabrication Services for Custom Metal Solutions
Metal fabrication is an important part of manufacturing — involving the creation of metal products by cutting, shaping and assembling raw metal materials. This process is the backbone of industrial production and a key part of developing new products across aerospace, construction, automotive and many more sectors.
As industries evolve and the demand for customised solutions increases, the need for skilled fabricators has surged. With the global manufacturing sector projected to reach $1 trillion by 2025, understanding metal fabrication processes is more critical than ever.
At Audhe Industries, we have over 10 years of experience in the metal fabrication field — enabling us to understand the nuances of the industry and deliver high-quality, precision results for every project. This guide covers the different types of fabrication processes, including sheet metal fabrication and steel fabrication, helping businesses identify the right services for their specific needs.
8The 8 Types of Metal Fabrication Processes
1. Cutting Processes
Cutting processes are foundational in metal fabrication — allowing removal of unwanted material and shaping of metal parts. The three main approaches differ in energy source, precision and material suitability.
Mechanical Cutting
Sawing, punching and drilling. Cost-effective for simple shapes and standard material thicknesses. Limited precision for complex or curved designs. Best for basic industrial components and metal sheets.
Thermal Cutting
Laser cutting, plasma cutting and oxygen cutting. High precision and speed — ideal for intricate designs and complex geometries in sheet metal fabrication. Higher operational cost than mechanical methods.
Water Jet Cutting
High-pressure water (sometimes with abrasive) slices through metal without heat. No heat-affected zones — preserves material integrity. Slower than thermal methods. Best for sensitive, composite or mixed-material cutting.
2. Forming Processes
Forming processes reshape metal materials without removing any material — using mechanical force, heat or both to achieve the desired geometry.
Rolling
Material passed through rollers to reduce thickness or create profiles. Ideal for steel and aluminium sheet, plate and structural section production at high volume.
Extrusion
Metal forced through a shaped die to create continuous complex cross-sections. Used extensively in aluminium profiles for construction, automotive and electronics enclosures.
Die Forming (Stamping)
Sheet metal stamped using matched punch and die sets to create precise shapes at high speed. Automotive body panels, brackets and complex sheet components are typical applications.
Forging
Compressive forces (hammer, press or roll) shape metal — producing parts with superior grain structure and mechanical properties. Essential for high-strength aerospace, automotive and tooling applications.
3. Welding
Welding joins metal pieces by melting edges and fusing them together — creating bonds that are often stronger than the base metal itself. The right welding process depends on material type, thickness and required quality standard.
MIG Welding
Continuous wire feed into the weld pool under a shielding gas. Fast, versatile and suitable for thin to medium-thick metals. Widely used in automotive and light fabrication.
TIG Welding
Non-consumable tungsten electrode with separate filler wire. Precise control of heat input — ideal for thin materials, stainless steel, aluminium and complex shapes in aerospace and precision fabrication.
Arc Welding (SMAW)
Electric arc between consumable electrode and workpiece generates heat. Versatile across metal types and thicknesses. Common in structural fabrication, construction and heavy machinery.
MIG vs TIG — When to Choose
MIG: faster, lower skill requirement, good for thicker metals and production volume. TIG: slower, higher skill, superior finish and quality for precision or thin-section work.
✅ Advantages
- Creates strong, durable joints — often stronger than base metal
- Works on a wide range of materials and thicknesses
- Suitable for both simple and complex structural assemblies
⚠️ Considerations
- Requires skilled welders — quality is operator-dependent
- Risk of distortion (warping) from heat input on thin materials
- More time-consuming for complex or precision-critical joints
4. Soldering and Brazing
Both methods join metal parts using a filler metal that melts at lower temperatures than the base materials — without melting the base metal itself. Ideal for heat-sensitive components and joining dissimilar metals.
Soldering
Filler metal (solder) melts below 450°C. The standard joining method for electronics — PCB assembly, component attachment and cable connectors where low-temperature processing is essential.
Brazing
Filler metal melts above 450°C using a torch, furnace or induction. Stronger than soldering — used in HVAC systems, plumbing, refrigeration, bicycle frames and jewellery for joining dissimilar metals.
✅ Advantages
- Ideal for heat-sensitive or delicate components
- Excellent for joining dissimilar metals reliably
- No base metal melting — preserves material properties
⚠️ Considerations
- Joints are not as strong as welded joints for structural loads
- Surface cleanliness is critical — contamination causes bond failure
- Limited to lower-stress applications versus welding
5. Fastening
Mechanical fastening uses hardware — bolts, screws, nuts and rivets — to assemble metal parts. Particularly useful when disassembly for maintenance or adjustment is a design requirement.
Bolts and Screws
Strong, removable connections for construction, machinery and structural assemblies. Torque-controlled installation ensures consistent clamping force. Locking features prevent loosening under vibration.
Riveting
A metal fastener is permanently deformed to create a solid joint — used in bridges, aircraft structures and ship hulls where strength and resistance to shear loads are critical without requiring access to both sides after assembly.
✅ Advantages
- Easily disassembled for repair, adjustment or replacement
- Straightforward installation — minimal specialised training
- Predictable, inspectable joint strength
⚠️ Considerations
- Additional components (fasteners, inserts) add cost and weight
- Vibration can loosen threaded fasteners over time — requires locking features or periodic inspection
6. Adhesive Bonding
Adhesive bonding uses structural glues to join metal parts — increasingly popular in automotive and aerospace where weight reduction, corrosion isolation and joining of dissimilar materials are priorities.
Structural Adhesives
High-strength, load-bearing adhesives for automotive body assembly, aerospace panel bonding and industrial equipment. Distribute stress evenly across the joint — superior fatigue resistance versus spot-welded or bolted alternatives.
Epoxy and Polyurethane
Versatile two-part adhesives that bond metals to metals, plastics, composites and ceramics. Used for repair, hybrid joints and specialist applications. Polyurethane provides flexibility; epoxy provides maximum strength.
✅ Advantages
- Distributes stress evenly — improved fatigue life over point-fastening methods
- Joins dissimilar materials without galvanic corrosion risk
- No heat input — eliminates thermal distortion entirely
⚠️ Considerations
- Cure time can slow production — requires careful handling while setting
- Temperature, humidity and surface contamination affect bond strength
- Non-destructive inspection of bonded joints is more complex than welded joints
7. Machining Processes
Machining removes material from a workpiece to achieve precise dimensions, surface finish and geometric features impossible to achieve directly from casting or forming alone.
Drilling
Creating accurate circular holes — from simple through-holes to precision-bored bearing housings. Drill geometry, feed rate and cutting speed are controlled for hole quality and tolerance.
Turning (CNC Lathe)
Workpiece rotates against a stationary cutting tool to produce cylindrical features — shafts, threads, grooves and complex profiles with very tight diameter tolerances and excellent surface finish.
Milling (CNC Mill)
Rotating multi-tooth cutter removes material from a stationary or moving workpiece. Produces flat faces, pockets, slots, contours and complex 3D surfaces. The foundation of modern precision machining centres.
Grinding and EDM
Grinding achieves the finest surface finishes and tightest tolerances (Ra <0.1µm). EDM (Electrical Discharge Machining) erodes material spark by spark — enabling shapes impossible with conventional cutting tools.
8. Casting
Casting pours liquid metal into a mould and allows it to solidify — producing complex three-dimensional shapes that would be difficult or impossible to achieve by machining from solid. Each method suits different volumes, materials and complexity levels.
Sand Casting
Expendable sand moulds — suitable for creating large, complex shapes in ferrous and non-ferrous metals. Lowest tooling cost; good for low-volume production and large parts. Rougher surface finish than die casting.
Investment Casting
High precision for intricate designs and detailed small-to-medium parts. Wax patterns coated in ceramic shell — excellent surface finish and tight tolerances. Used in aerospace turbine blades, jewellery and surgical instruments.
Die Casting
Molten metal injected into hardened steel dies under pressure. High volume, excellent dimensional consistency and smooth surface finish for aluminium, zinc and magnesium components. See our detailed die casting guides.
Gravity Die Casting
Molten metal poured into reusable permanent moulds using gravity alone. Lower porosity than pressure die casting — good for structural aluminium parts at medium production volumes. Lower tooling cost than HPDC.
→Industry Insight: The Growing Demand for Metal Fabrication
The global manufacturing landscape is undergoing rapid transformation. The sector is estimated to reach $1 trillion by 2025 — driven by increasing demand for custom parts, prototypes and mass production that has intensified the need for specialised metal fabrication services.
Supply Chain Complexity
As businesses adapt to global supply chains and nearshoring trends, the need for local, responsive fabrication partners has intensified — reducing lead times and logistics risk.
Customisation Demands
Customers increasingly seek tailored metal products — pushing manufacturers to enhance fabrication capabilities, reduce minimum order quantities and shorten development-to-production cycles.
Sustainability Initiatives
Companies are prioritising eco-friendly fabrication — driving innovation in material selection, recycled metals, energy-efficient processes and waste reduction throughout the fabrication lifecycle.
→Why You Need the Right Metal Fabricator
Choosing the right metal fabricator is essential for ensuring high-quality results, cost-effectiveness and timely delivery. As industries demand more complex and customised solutions, selecting the wrong partner can have significant consequences.
- Advanced materials expertise: The growing use of lightweight alloys, high-strength steels and composite materials requires fabricators who understand how to handle these materials properly. Wrong material selection — or lack of handling expertise — compromises durability, performance and cost-efficiency of the final product
- Technology proficiency: Fabricators with expertise in robotic automation, CNC machining and 3D printing deliver better precision, tighter tolerances and faster turnaround — particularly critical for custom or complex parts where accuracy is essential
- Quality consistency: Without rigorous quality systems, defects discovered after delivery cost far more to rectify than prevention during production — rework, delays and customer returns damage both projects and relationships
- Scalability: The right partner grows with your needs — handling low-volume prototypes with the same care as high-volume production runs, without quality variation between batch sizes
Careful evaluation of potential fabrication partners — before committing to a project — ensures you get the best value and meet your project's specific requirements from the outset.
→How to Select the Right Fabrication Service Provider
Experience and Track Record
Relevant industry experience is critical for understanding specific project needs — especially in steel fabrication, sheet metal fabrication and precision machined components. Ask for examples from comparable industries and applications, not just general capability claims.
Industry and Material Expertise
Familiarity with specific materials (aluminium alloys, stainless steel, composites) and processes (laser cutting, TIG welding, CNC machining) directly enhances quality and efficiency. Generalist shops may lack the depth that specialist applications demand.
Quality Standards and Certifications
Verify ISO 9001 certification as a baseline. Industry-specific standards (IATF 16949 for automotive, AS9100 for aerospace) demonstrate the systems-level commitment to quality that mission-critical fabrication requires. Ask to review quality control documentation and inspection methods.
Cost and Turnaround Time
Ensure quotes are competitive without compromising quality. Assess total cost of ownership — including tooling, secondary operations, inspection and logistics — not just per-part price. Confirm realistic lead times with buffer for design iterations.
Location and Logistics
Proximity reduces shipping costs, simplifies site visits for design reviews and tooling approvals, and improves responsiveness for urgent changes. Local partners can also better support just-in-time delivery requirements.
Customer Reviews and References
Past work and client feedback are invaluable for assessing a fabricator's real-world capabilities. Ask for references from customers in your industry. Consistent positive feedback on quality, communication and on-time delivery is the strongest predictor of a good partnership.
Key Questions to Ask Metal Fabricators
- What materials and processes are you most experienced with — and what are your limits?
- Can you handle both small-batch custom projects and high-volume production runs?
- What quality control processes and certifications do you have in place?
- How do you manage excess material and waste throughout the fabrication process?
- Can you provide references from comparable projects or industries?
AAudhe Industries — Our Answers to Your Questions
When you ask us those important qualifying questions, here is exactly how we answer:
At Audhe Industries, we specialise in a wide variety of metals — steel, aluminium, stainless steel, copper alloys and zinc alloys. Our expertise spans cutting (laser, plasma, water jet), welding (MIG, TIG, arc), forming, CNC machining, casting and finishing processes. With 10+ years of experience, we handle complex multi-process fabrication requirements across automotive, aerospace, industrial and electronics sectors.
Yes — we excel at both. Whether you need one-off prototypes, small batches for product validation or large-scale manufacturing runs, our processes are scalable to suit your requirements. Our setup accommodates rapid changeovers and we maintain the same quality standards regardless of batch size.
We implement rigorous quality control at every stage — from incoming material inspection and in-process monitoring to final dimensional inspection and surface quality verification. Our ISO 9001 certification ensures all products meet the highest standards of precision and reliability. We maintain full traceability for each job from raw material to finished product.
We are committed to sustainable manufacturing. We optimise material usage through intelligent nesting and planning before cutting, recycle all metal scrap, and minimise waste through advanced process techniques. This reduces both environmental impact and material costs — benefits we pass on to clients through competitive pricing on materials.
→Key Materials and Techniques in Metal Fabrication
The fabrication process begins with choosing the right raw materials. Carbon steel, stainless steel and aluminium are the most widely used — each offering different combinations of strength, corrosion resistance, machinability and cost.
- Carbon steel: The most widely used structural metal — strong, weldable and cost-effective. Available in sheet, plate, tube, bar and section. Carbon content determines hardness and weldability; low-carbon (mild steel) is the standard fabrication material
- Stainless steel: Corrosion-resistant, hygienic and high-strength. Essential for food processing, pharmaceutical, chemical and marine applications. Grades 304 and 316L are most common in fabrication; 316L offers superior corrosion resistance
- Aluminium: Lightweight, corrosion-resistant and highly machinable. Increasingly used in automotive, aerospace and electronics where weight reduction is critical. Alloys like 6061 and 5052 are workhorses of aluminium fabrication
- Advanced materials: High-strength steels (Hardox, Domex), duplex stainless steels and metal composites are increasingly used for demanding applications requiring exceptional strength-to-weight or corrosion performance
Modern techniques like 3D printing (additive manufacturing) allow for rapid prototyping of highly precise metal components — offering design flexibility and fast turnaround for first articles before committing to fabrication tooling. After shaping, finishing processes like powder coating, anodising and shot blasting enhance durability and appearance — providing protection against corrosion and wear while meeting aesthetic requirements.
Conclusion
Understanding metal fabrication processes and selecting the right fabricator is crucial for achieving success in the manufacturing sector. Fabricators play a significant role in driving innovation, enhancing product quality and keeping manufacturing competitive across every industry that relies on custom metal components.
With over 10 years of experience, Audhe Industries is well-equipped to assist businesses with all their fabrication needs — from material selection and process planning through production and finishing. We deliver high-quality results for every project, regardless of complexity or volume.


